Industrial Spotlight Chandelier — Black Metal Beam, 4×GU10, Barn Doors, Adjustable Height
Industrial ceiling spotlight bar in black metal with 4 fully adjustable GU10 spots (50W max each, 230V), each fitted with controllable barn doors for precise light direction. Total length 126.5cm, height adjustable up to 102cm. Bulbs not included. Hardwired ceiling fixture.
Technical specifications
| Light source | 4× GU10 — 50W max per spot, bulbs not included |
| Voltage | 230V |
| IP rating | IP20 — indoor dry use only |
| Material & finish | Black metal — matte industrial finish |
| Barn doors | 4 adjustable flaps per spot — manual control |
| Dimensions | Length: 126.5cm — Height adjustable up to 102cm |
| Dimmable | Depends on bulb and dimmer used |
| Connection | Hardwired — professional installation recommended |
Industrial Spotlight Chandelier — Film-Set Aesthetic, Barn Door Control, Loft & Living Room
This is a hardwired ceiling fixture — a qualified electrician is required for installation. The barn doors on each spot are the defining feature: four adjustable metal flaps that narrow or widen the beam, allowing you to shape the light precisely — useful for highlighting artwork, creating a spotlight effect on a dining table, or cutting off spill light from adjacent areas. Each spot also rotates and tilts independently on the beam. The GU10 socket is a twist-lock fitting (not a screw fitting like E27/E14) — ensure you purchase GU10 bulbs specifically. LED GU10 bulbs (5–7W, 2700K or 3000K) are strongly recommended over halogen for heat management and efficiency; the 50W max rating is the halogen equivalent. The beam length of 126.5cm suits rooms of at least 3m wide; the adjustable drop (up to 102cm) accommodates both standard and higher ceilings. No built-in dimmer; dimmability depends on bulb and wall circuit. Rated IP20: dry indoor rooms only. Browse our full spotlights & downlights collection.
The black metal beam suits industrial, loft, and contemporary interiors — it pairs naturally with exposed brick, concrete ceilings, dark wood, and raw metal furniture. Use all four spots pointing in different directions for broad, layered coverage across a large room; or cluster two or three toward a single focal point (a gallery wall, a kitchen island, a reading chair) for a dramatic accent. For a cohesive industrial scheme, combine with wall lights in matte black. For broader inspiration, read our guide on industrial ceiling lights in Ireland 2026.
Common questions
Do I need an electrician to install this fixture?
+
Yes. This is a hardwired ceiling fixture and must be installed by a qualified electrician. It connects directly to your ceiling wiring — it is not a plug-in lamp.
What are the barn doors and how do they work?
+
Each spot has four adjustable metal flaps (barn doors) that you open or close manually to shape the beam. Open them fully for a wide spread of light; close them partially to narrow the beam and reduce spill onto adjacent surfaces. This gives you precise control over where the light falls — similar to professional film or stage lighting rigs.
What type of bulb does this fixture take — GU10 or E27?
+
GU10 only. This is a twist-lock fitting — insert the bulb and rotate to lock. It is not compatible with E27 or E14 screw bulbs. Purchase GU10 LED bulbs specifically (5–7W recommended). Maximum wattage is 50W per spot (halogen equivalent).
Is this fixture dimmable?
+
There is no built-in dimmer. To dim the light, you need dimmable GU10 LED bulbs and a compatible dimmer wall switch — confirm compatibility with your electrician during installation.
Will this beam fit my room — how long is it?
+
The beam is 126.5cm long. It suits rooms of at least 3m wide where a linear fixture won't feel cramped. The drop height is adjustable up to 102cm from the ceiling — your electrician can set this during installation to suit your ceiling height.
Browse our spotlights & downlights collection or read our guide on industrial ceiling lights in Ireland 2026. Free delivery on orders over €50 — free returns within 30 days.
