Industrial Chandelier — Solid Wood Frame, 6 Transparent Lanterns, E27, Brown, Ø55cm
Free delivery over €50 · 30-day returns guarantee with free returns
Adds a rustic-industrial centrepiece to dining rooms and living areas — solid wood frame, six transparent metal lanterns on brown chains, E27 sockets, height adjustable to 100cm. Bulbs not included.
Technical Specifications
| Light source | E27 — bulbs not included (6 sockets) |
| Max wattage | 50W total across all sockets |
| Voltage | 90–260V — worldwide compatible |
| IP rating | IP20 — indoor use only |
| Material & finish | Solid wood frame (brown), metal chains (brown), metal lanterns (brown), metal base (black) |
| Diameter | Ø55cm |
| Max height (adjustable) | 100cm — adjusted via chain at installation |
| Tiltable | No — fixed horizontal position |
| Switch | No switch — wall switch required |
| Connection | Hardwired — electrician required |
| Dimmable | Depends on bulb — use dimmable E27 bulbs with a compatible dimmer switch |
Industrial Chandelier — 6 Lanterns, Solid Wood, Warm Ambient Light
The six transparent lanterns distributed around the solid wood frame produce a warm, multi-point ambient glow rather than a single concentrated beam — well suited to dining rooms, living rooms, or entrance halls where atmosphere matters more than task lighting. At Ø55cm, this is a mid-format chandelier: proportionate over a dining table of 120–160cm, or as a centrepiece in a room of 12–18m². The total wattage is 50W across all six sockets — approximately 8W per socket — so use low-wattage candle-style LED E27 bulbs at 2700K for a warm, consistent tone across all lanterns. The transparent lantern glass means the bulb shape is visible; candle or flame-tip bulbs suit the aesthetic better than standard A-shape bulbs. Height is adjusted at installation by shortening the chain; confirm the final drop with your electrician. At 100cm maximum drop in a 240cm ceiling room, the bottom of the frame sits at 140cm from the floor — acceptable above a dining table but check clearance carefully.
The solid wood frame will show natural grain variation — this is a characteristic of the material, not a defect. The brown finish on the chains and lanterns creates a warm, cohesive tone that works well with timber furniture, leather seating, and warm-toned walls. It is a hardwired fitting requiring a qualified electrician. Not suitable for bathrooms or outdoor use (IP20). Browse our full chandeliers collection or read our chandeliers guide for room and style advice.
Common Questions
What wattage bulb should I use in each of the 6 sockets?
+
The total maximum is 50W across all 6 sockets — approximately 8W per socket. Use candle-style LED E27 bulbs rated 5–8W (equivalent to 40–60W incandescent) at 2700K. Do not exceed the total 50W rating.
Will the bulbs be visible through the lantern glass?
+
Yes — the lanterns are transparent, so the bulb shape is visible. Candle or flame-tip E27 bulbs suit the aesthetic. Avoid standard A-shape or globe bulbs — they will look out of place inside the lantern housing.
Will the solid wood frame show grain variation?
+
Yes — natural wood grain variation is a characteristic of solid wood, not a defect. Each piece will look slightly different. The brown finish is applied over the natural grain, so tone and texture will vary between units.
Does this require an electrician to install?
+
Yes — this is a hardwired fitting. A qualified electrician must connect it to the ceiling circuit and confirm the ceiling rose can support the weight of the fitting. There is no plug-in option.
Is Ø55cm the right size for my room?
+
Ø55cm is a mid-format chandelier — proportionate over a dining table of 120–160cm, or as a centrepiece in a room of 12–18m². In larger open-plan spaces it may read as modest; in smaller rooms it will feel appropriately scaled without dominating.
Browse our chandeliers collection or read our chandeliers guide. Free delivery on orders over €50. 30-day returns.
