Industrial Bell Pendant Light Dublin Lighting
Industrial Bell Pendant Light Dublin Lighting
Industrial Bell Pendant Light Dublin Lighting
Industrial Bell Pendant Light Dublin Lighting

Industrial Bell Pendant Light Iron Matt Black E27 Ø30cm

Regular price €69,90
✔️ 30-day money-back guarantee
Carbon-neutral delivery (5–7 days)

Industrial Bell Pendant Light Iron Matt Black E27 — Ø30cm Shade, 60cm Adjustable Chain

Bell-shaped industrial pendant in thermolaqué matt black iron, E27 fitting (max 25W), ×30cm shade, adjustable chain up to 60cm, hardwired. Directed downward beam ideal for kitchen worktops, dining tables, and reading nooks. Bulb not included.

Technical specifications

Light source E27 (max 25W) — bulb not included
IP rating IP20 — indoor use only
Material & finish Iron — matt black thermolaqué
Shade diameter 30 cm
Chain length Adjustable up to 60 cm
Dimmable Depends on bulb and dimmer used
Connection Hardwired — professional installation recommended

Industrial Bell Pendant — matt black iron, bell shade, focused downward beam, E27

This is a hardwired pendant requiring a qualified electrician for installation. The chain adjusts up to 60cm and can be shortened by removing links, but cannot be extended — 60cm is the maximum drop from ceiling to top of shade. Note the 25W maximum — one of the lowest wattage limits in this range; this fixture is designed for low-wattage LED bulbs only. A compact E27 LED (4–6W, 2700K) is the correct choice — it stays well within the thermal limit and produces a warm, focused beam through the bell shade. Do not use incandescent or halogen bulbs, which generate too much heat at this wattage cap. The bell shade directs light downward and slightly outward — it is a task and accent light, not a wide-area ambient light. The knurled screw detail and integrated cable routing give it an authentic retro-industrial finish. No dimming is built in; dimmability depends on the bulb and a compatible dimmer switch. Browse the full pendant lights collection for more styles.

At ×30cm, this bell pendant is a strong focal point without being oversized — ideal above a kitchen worktop, dining table for two, breakfast bar, or reading nook. Hang it so the bottom of the shade sits 70–80cm above the surface. The 60cm maximum chain drop suits standard ceiling heights (2.4–2.6m) well; for higher ceilings, this pendant may hang too high for effective task lighting. For a bolder statement over a longer table, cluster two or three in a row — each requires its own ceiling connection. The matt black finish pairs naturally with exposed brick, raw wood, concrete surfaces, and warm copper or brass accents. For styling ideas, read our guide on pendant lights over kitchen islands.

Common questions

Why is the maximum wattage only 25W?

+

The 25W limit is set by the fixture's wiring and thermal rating. This pendant is designed for LED bulbs only — do not use incandescent or halogen bulbs, which generate far more heat than LEDs at the same wattage. A 4–6W E27 LED produces ample warm light for this style of pendant and stays well within the safe limit.

Is 60cm of chain enough for my ceiling height?

+

The chain adjusts up to 60cm — this is the maximum drop from the ceiling rose to the top of the shade. In a room with a 2.5m ceiling, the bottom of the shade would sit roughly 1.6–1.7m from the floor, which is comfortable for most uses. For very high ceilings (3m+), this pendant may hang too high for effective task lighting above a surface — consider a pendant with a longer cable in that case.

Does this pendant need an electrician to install?

+

Yes — this is a hardwired fixture with no plug. It connects directly to your ceiling wiring via a ceiling rose. We recommend a qualified electrician, who can also adjust the chain length to your preferred drop during installation.

What bulb works best with this bell pendant?

+

A compact E27 filament LED (4–6W, 2700K) gives the warmest, most authentic industrial result. The bell shade partially conceals the bulb, so a standard A60 or small globe shape works well. Avoid large decorative bulbs (G125, ST64) that may protrude below the shade opening. Maximum wattage is 25W — LED only.

Can I use this pendant outdoors or in a bathroom?

+

No — this pendant is rated IP20, which means it has no protection against moisture or water ingress. It must be installed in a dry indoor environment only. For bathrooms or outdoor use, you need a fitting rated IP44 or higher.

Browse our pendant lights collection or read our pendant lights over kitchen islands guide. Free delivery on orders over €50 — free returns within 30 days.


  • Free delivery from €50
  • Free returns within 30 days
  • Irish customer support
  • 100% secure payment