E14 LED Candle Bulb — Warm or Cool White, 48 / 60 / 80 LEDs
A compact E14 candle-shaped LED bulb with integrated LEDs — available in 48, 60 or 80 LED counts and in warm white (2700–3000K) or cool white (5000–6500K). Integrated LED — no bulb to buy. Voltage: 220–240V standard mains.
Technical specifications
| Light source | Integrated LED — fixed, non-replaceable |
| Base / Socket | E14 (small Edison screw) |
| LED count options | 48 LEDs / 60 LEDs / 80 LEDs |
| Colour temperature | Warm white 2700–3000K / Cool white 5000–6500K |
| Voltage | 220–240V (standard mains) |
| IP rating | IP20 — indoor use only |
| Rated lifespan | 10,000 hours |
| Certifications | CE, RoHS |
| Connection | E14 screw fitting — direct replacement |
E14 LED Candle Bulb — Efficient, versatile, long-lasting
This E14 candle bulb is built around a 2835 LED chip array — a chip format chosen for its balance of brightness and thermal efficiency. The candle silhouette fits naturally into chandeliers, wall lights, and table lamps that use E14 sockets. Choose warm white (2700–3000K) for living rooms and bedrooms where a relaxed, amber-toned light suits the mood, or cool white (5000–6500K) for kitchens, bathrooms, or task areas where clarity matters. The 80-LED variant delivers noticeably more output than the 48-LED version — useful when replacing a higher-wattage incandescent in a fitting with a visible bulb. Note: the colour temperature is fixed at purchase — it cannot be adjusted after installation, and the bulb is not dimmable.
Because the LEDs are integrated directly into the bulb body, there is no separate component to source or replace — the bulb arrives ready to install. It screws directly into any standard E14 socket, making it a straightforward swap for older incandescent or halogen candle bulbs. At 10,000 rated hours, a bulb used four hours per day will last approximately seven years before needing replacement. For more guidance on choosing the right bulb for your fitting, see our indoor lighting guide or browse the full LED bulbs collection.
Common questions
Will this bulb fit my existing E14 fitting?
+
Yes — this bulb uses a standard E14 small Edison screw base and is a direct replacement for any E14 incandescent or halogen candle bulb. Check that your fitting accepts the candle shape (C35 profile) and that the bulb length fits within any shade or enclosure.
What is the difference between 48, 60 and 80 LEDs?
+
More LEDs means more light output. The 48-LED version is suitable for decorative or accent use — for example in a multi-arm chandelier where several bulbs combine. The 60-LED version is a good all-round choice. The 80-LED version is the brightest and best suited to replacing a higher-wattage incandescent in a single-bulb fitting or a reading lamp.
Is this bulb dimmable?
+
No — this bulb is not dimmable. Using it with a dimmer switch may cause flickering, buzzing, or reduced lifespan. If you need a dimmable E14 candle bulb, please check our full LED bulbs range for compatible options.
Can I use this bulb in a bathroom or outdoor fitting?
+
This bulb is rated IP20 — suitable for dry indoor environments only. It is not suitable for use in open bathroom zones (Zone 1 or 2) or in outdoor fittings exposed to moisture. For bathroom or outdoor use, choose a bulb with a minimum IP44 rating.
Can I mix warm and cool white bulbs in the same chandelier?
+
Technically yes, but it is not recommended — mixing colour temperatures in the same fitting creates an uneven, inconsistent light that is visually distracting. For chandeliers and multi-arm wall lights, choose one colour temperature and apply it consistently across all sockets for a clean, cohesive result.
Browse the full LED Bulbs collection or read our guide to choosing indoor lighting. Free delivery on orders over €50. 30-day returns.
