Industrial Pendant Light Bar Iron Perforated E27 — L80cm W22cm H14cm, 100cm Chain
Bar-style industrial pendant in welded iron with a perforated shade and fabric accents, single E27 fitting (max 40W), adjustable chain up to 100cm, hardwired. Bulb not included.
Technical specifications
| Light source | E27 (max 40W) — bulb not included |
| Voltage | 230V |
| IP rating | IP20 — indoor use only |
| Material & finish | Welded iron — perforated shade with fabric accents |
| Dimensions | L 80 cm × W 22 cm × H 14 cm |
| Chain length | Adjustable up to 100 cm |
| Dimmable | Depends on bulb and dimmer used |
| Connection | Hardwired — professional installation recommended |
Industrial Pendant Light Bar — perforated iron shade, artisan welding, E27 bar format
This is a hardwired pendant — it connects directly to your ceiling wiring and requires a qualified electrician for installation. The chain is adjustable up to 100cm and can be shortened by removing links, but cannot be extended beyond 100cm. The perforated iron shade projects patterned light and shadow onto surrounding surfaces — a deliberate design effect that looks best with a visible filament bulb (T30 or ST64 style, E27, max 40W, 2200–2700K). Note the 40W maximum — lower than many pendants — so avoid high-wattage LED equivalents that exceed this rating. The fabric accents are decorative and not heat-resistant at close range; keep bulb wattage within spec. No dimming is built in; dimmability depends on the bulb and a compatible dimmer switch on the circuit. The bar format (80cm long) is wide — ensure adequate ceiling clearance on all sides. Browse the full pendant lights collection for more styles.
At 80cm long, this bar pendant is best suited to surfaces of similar or greater width — kitchen islands, bar counters, restaurant tables, or long dining tables. Hang it so the bottom of the shade sits 70–80cm above the surface for comfortable task and ambient lighting. In a domestic setting, it works well in open-plan kitchens or loft-style living rooms where the industrial aesthetic is already present. For narrower spaces, a single cage pendant may be a better fit. For placement inspiration, read our guide on pendant lights over kitchen islands.
Common questions
Does this pendant need an electrician to install?
+
Yes — this is a hardwired fixture with no plug. It connects directly to your ceiling wiring via a ceiling rose. We recommend hiring a qualified electrician to ensure a safe and compliant installation.
Why is the maximum wattage only 40W?
+
The 40W limit is set by the fixture's wiring and the proximity of the fabric accents to the bulb. Exceeding this risks overheating. In practice, a filament LED at 4–6W (E27, 2200–2700K) produces ample warm light for this style of pendant and stays well within the safe limit. Always check the wattage on your bulb packaging before fitting.
Can I shorten the chain to fit a lower ceiling?
+
Yes — the chain can be shortened by removing links during installation. It cannot be extended beyond 100cm. Your electrician can adjust the chain length and loop any excess cable inside the ceiling rose to achieve the exact drop you need.
What bulb type gives the best result with this pendant?
+
A T30 or ST64 filament LED bulb (E27, 4–6W, 2200–2700K) gives the most authentic industrial look — the visible filament glows warmly through the perforated shade and creates the characteristic light-and-shadow pattern on the ceiling and walls. Avoid opaque or frosted bulbs, which block the filament effect.
Is this pendant suitable for a restaurant or commercial space?
+
Yes — the bar format and artisan iron construction make it well suited to bars, restaurants, and cafés. It is rated for indoor use only (IP20), so it must be installed in a dry, covered environment. For commercial installations, always have a certified electrician carry out the work and verify compliance with local electrical regulations.
Browse our pendant lights collection or read our pendant lights over kitchen islands guide. Free delivery on orders over €50 — free returns within 30 days.
