Industrial Multi-Spot Pendant Light — GU10 Integrated LED, 6 Tiltable Heads, Black & Gold, Ø65cm
Free delivery over €50 · 30-day returns guarantee with free returns
Transforms a bedroom or living room ceiling into a flexible, directional lighting rig — six individually tiltable GU10 spots on a Ø65cm frame, integrated LED, no bulb to buy.
Technical Specifications
| Light source | GU10 integrated LED — no bulb to buy |
| Total wattage | 50W |
| Voltage | 90–260V — worldwide compatible |
| IP rating | IP20 — indoor use only |
| Material & finish | Metal frame, cable suspension, metal spot heads — black frame / black & gold spots |
| Diameter | Ø65cm |
| Height (adjustable) | 60cm — adjustable via cable |
| Spot heads | 6 individually tiltable heads |
| Switch | No switch — wall switch required |
| Connection | Hardwired — electrician required |
| Dimmable | Depends on LED module — check compatibility with your dimmer switch |
Multi-Spot Pendant — Directional Light, Integrated LED, Flexible Configuration
The six GU10 heads can each be tilted independently, allowing you to direct light toward specific areas of the room — a reading corner, a wardrobe, a piece of art — rather than casting a single fixed pool downward. This makes it more versatile than a standard pendant for bedrooms or living rooms where multiple zones need illumination from a single ceiling point. The LED is integrated into each GU10 head: there is no separate bulb to source or replace. The colour temperature is fixed at the factory — confirm warm white or cool white from the SKU before ordering, as this cannot be changed after purchase. The black and gold finish on the spot heads adds a decorative contrast against the black frame; the gold detail is visible from below and reads as a premium accent in the room.
At Ø65cm, this fitting suits rooms of at least 12m² — in smaller spaces it will dominate visually. The cable suspension height is adjustable at installation; confirm the final drop with your electrician before they leave. It is a hardwired fitting requiring a qualified electrician. Not suitable for bathrooms or outdoor use (IP20). Browse our full pendant lights collection or read our indoor lighting guide for room-by-room advice.
Common Questions
Are the GU10 LEDs replaceable if one fails?
+
The LEDs are integrated into the GU10 module. Standard GU10 LED bulbs are widely available and can be swapped if the module uses a replaceable format — check the product on arrival. If the LED is non-replaceable and fails, the individual head would need to be replaced. Contact us if you need clarification before ordering.
Can I choose the colour temperature (warm white vs cool white)?
+
The colour temperature is fixed at the factory. Check the SKU description carefully — warm white (2700–3000K) and cool white (4000K+) variants may be available. This cannot be changed after purchase.
How far can each spot head tilt?
+
Each head tilts independently to direct light toward a specific area. The exact tilt range is not specified by the manufacturer — in practice, most multi-spot pendants of this type allow 30–45° of tilt per head. The heads can be repositioned by hand without tools.
Does this require an electrician to install?
+
Yes — this is a hardwired fitting. A qualified electrician must connect it to the ceiling circuit. There is no plug-in option. If there is no existing ceiling rose at the desired location, a new circuit point will be required.
Is Ø65cm too large for a standard bedroom?
+
For a bedroom under 12m², Ø65cm will feel large. In a master bedroom of 15m² or more, it works well as a centrepiece. The multi-spot format means it can light multiple zones (bed, wardrobe, seating) from a single ceiling point, which is an advantage in larger rooms.
Browse our pendant lights collection or read our indoor lighting guide. Free delivery on orders over €50. 30-day returns.
