White IP44 Table Lamp 2W Neutral White 4000K–5500K Stainless Steel — Bathroom Zone 2 Rated
Free delivery over €50 · 30-day returns guarantee with free returns
A compact white table lamp in stainless steel with 2W integrated LED, neutral white output (4000K–5500K), and IP44 rating — suitable for bathroom Zone 2 and damp indoor locations. Integrated LED — no bulb to buy.
Technical specifications
| Light source | Integrated LED — fixed, non-replaceable |
| Power | 2W |
| Colour temperature | 4000K–5500K — neutral white |
| IP rating | IP44 — bathroom Zone 2 rated |
| Material & finish | Stainless steel — white finish |
| Weight | 300 g |
| Connection | Standard plug |
White IP44 Table Lamp — Bathroom Use, Neutral Light, Stainless Steel
IP44 certifies this lamp for bathroom Zone 2 installation — beyond 60 cm from the edge of a bath or shower tray, above 225 cm height, or in enclosed areas where the showerhead does not reach. It is not suitable for Zone 1 (directly above a bath or inside a shower enclosure), which requires a minimum of IP65. The LED is integrated and non-replaceable; at 2W it is designed for accent and ambient use rather than primary task lighting. The neutral white output (4000K–5500K) suits bathrooms and utility spaces where a clean, clear light is preferred over warm white. The stainless steel construction resists humidity and condensation well over time.
Outside the bathroom, this lamp works equally well on a bedside table, desk, or shelf where a compact, clean-lined fitting is needed. Installation in bathroom zones must be carried out by a registered electrician. For more bathroom-compatible and accent lighting options, browse our table lamps collection or read our lighting advice guide.
Common questions
Can I install this lamp directly above a bath or inside a shower?
+
No — Zone 1 (directly above a bath or inside a shower enclosure) requires a minimum of IP65. This lamp is IP44 and is rated for Zone 2 only. Confirm zone boundaries with your electrician before installation.
Do I need an electrician to install this in a bathroom?
+
Yes — electrical work in bathroom zones must be carried out by a registered electrician (RECI in Ireland). This applies to any new fitting installed in Zone 1 or Zone 2.
Is the LED replaceable if it fails?
+
No — the LED is integrated and non-replaceable. Integrated LEDs are rated for long-term use, but the lamp cannot be repaired if the module fails.
Will condensation affect this lamp over time?
+
IP44 covers the level of moisture exposure typical in bathroom Zone 2. The stainless steel construction also resists corrosion well. Inspect annually — if seals show signs of degradation or internal condensation is visible, replace the fitting.
Can I use this lamp outside the bathroom — on a bedside table or desk?
+
Yes — IP44 is a minimum rating for bathrooms, but the lamp works perfectly in any dry indoor location. The neutral white light and compact stainless steel design suit bedside tables, desks, and shelving equally well.
Browse our full table lamps collection or read our indoor lighting guide. Free delivery on orders over €50 — see our shipping policy and returns policy.
