Solar Motion Sensor Wall Light — 20 LED, Daylight White 6000K, IP44, 3–4m Range, Wall Mount
Free delivery over €50 · 30-day returns guarantee with free returns
A solar-powered outdoor wall light with motion sensor. 20 LEDs, daylight white 6000–6500K. IP44. Standby mode at dusk, full brightness on motion (15–20 sec). Wall mount, no wiring. Available as single unit or sets of 2, 4, 6, or 10.
Technical Specifications
| Light source | 20 integrated LEDs — daylight white, 6000–6500K |
| Power source | Solar panel — 0.55W / 6V, charge 6–8h direct sun |
| Motion sensor | Range ~3–4m, activation duration 15–20 sec |
| Modes | Standby (dim glow at dusk) + Motion (full brightness) |
| IP rating | IP44 — rain and dust resistant, outdoor use |
| Material | ABS plastic — robust, weatherproof housing |
| Dimensions | ~10 × 13 × 5cm |
| Control | On/off switch on unit |
| Installation | Wall mount — screws included, no wiring required |
| Available as | Single unit or sets of 2, 4, 6, or 10 |
Solar Motion Sensor Light — Modes, Sensor Range, Placement
The light operates in two automatic modes: standby mode activates at dusk with a dim glow; when motion is detected within ~3–4m, it switches to full brightness for 15–20 seconds, then returns to standby. During daylight hours it stays fully off regardless of movement — saving charge for the night. Daylight white at 6000–6500K is a cool, bright output suited to security and task use — not a warm ambient tone. IP44 rated — suitable for permanent outdoor use in rain and dust. The solar panel requires 6–8 hours of direct sunlight for a full charge; in overcast conditions or short winter days, standby and motion performance will be reduced. Position the unit where the panel receives maximum direct sun and the sensor covers the area you want to monitor — typically above a door, gate, or garage entrance at 2–3m height. No wiring, no electrician required — wall mount with screws included.
Available as a single unit or in sets of 2, 4, 6, or 10 — sets are cost-effective for covering multiple entry points, a full driveway perimeter, or a row of garage bays. Each unit operates independently. Browse our full solar lights collection or read our outdoor garden lights guide for placement advice.
Common Questions
Does this need any wiring or an electrician?
+
No — fully solar-powered and wireless. Mount it to the wall with the included screws, position the solar panel toward direct sun, and it charges and operates automatically. No wiring, no electrician required.
Can I replace the LEDs or the battery?
+
The LEDs are integrated and fixed — they cannot be replaced by the user. The internal rechargeable battery is charged by the solar panel and is not user-replaceable. If the unit stops working after extended use, contact us.
How does the motion sensor mode work exactly?
+
At dusk the light enters standby mode with a dim glow. When motion is detected within ~3–4m, it switches to full brightness for 15–20 seconds, then returns to standby automatically. During daylight hours it stays fully off regardless of movement. The 15–20 second activation time is fixed — there is no manual override for the motion duration.
How many units do I need for my property?
+
Each unit covers a detection range of ~3–4m. For a standard front door, 1 unit is sufficient. For a driveway or garage with multiple entry points, 2–4 units spaced at 3–4m intervals gives full coverage. For a full perimeter or commercial property, the set of 10 is the most cost-effective option. Each unit operates independently.
Will it work well in winter or overcast weather?
+
The panel charges in diffuse daylight, but output is reduced compared to direct sun. In overcast conditions or short winter days, standby and motion performance will be reduced. Position the unit south-facing and unshaded to maximise daily charge. IP44 rated — suitable for permanent outdoor use in rain and wind year-round.
Browse our solar lights collection or read our outdoor garden lights guide. Free delivery on orders over €50. 30-day returns.
