Outdoor Wall Light Black Powder-Coated Aluminium Integrated LED 10W Motion Sensor IP65
Free delivery over €50 · 30-day returns guarantee with free returns
A sleek black powder-coated aluminium outdoor wall light with integrated 10W LED (3000K warm white), built-in motion sensor, and IP65 weatherproof rating — hardwired, 110–240V compatible. Integrated LED — no bulb to buy.
Technical Specifications
| Light source | Integrated LED — fixed, non-replaceable |
| Power | 10W |
| Colour temperature | 3000K — Warm white |
| Voltage | 110–240V AC |
| IP rating | IP65 — fully weatherproof |
| Material & finish | Black powder-coated aluminium |
| Dimensions | W 5 cm × L 27 cm (body) · W 5 cm × L 8 cm (backplate) |
| Motion sensor | Yes — detection range 3–5 m |
| Dimmable | No |
| Connection | Hardwired |
Outdoor Wall Light — Motion-Activated, IP65 Weatherproof, Warm White LED
Built from black powder-coated aluminium, this wall light is designed to handle outdoor conditions year-round — the IP65 rating means it's fully protected against dust and water jets, making it suitable for exposed facades, porches, and garden walls. The integrated 10W LED runs at a fixed 3000K warm white; the colour temperature cannot be adjusted. The light is not dimmable, and the LED module is fixed and non-replaceable — plan for the full lifespan of the fitting rather than bulb swaps. Installation is hardwired, so a qualified electrician is required to connect it to your mains supply.
The built-in motion sensor covers a detection range of 3–5 metres, making it well suited to front doors, side passages, and garage entrances where hands-free activation adds genuine convenience. For broader perimeter lighting, pair it with additional units or browse our full outdoor lights collection. For layout ideas and placement tips, see our guide on outdoor and garden lighting.
Common Questions
Does this need a qualified electrician to install?
+
Yes. This fitting is hardwired — it connects directly to your mains supply with no plug. A qualified electrician is required for installation. It is not a plug-in product.
Can I replace the LED module when it fails?
+
No — the LED is integrated and fixed. It cannot be replaced. The fitting is designed to last the full lifespan of the LED module, after which the entire unit would need replacing.
How far does the motion sensor detect movement?
+
The sensor has a detection range of 3 to 5 metres. It is not adjustable — the sensitivity and range are fixed at the factory setting.
Is the light suitable for very exposed or coastal locations?
+
The IP65 rating protects against dust and water jets, making it suitable for most outdoor environments including rain-exposed walls. For highly saline or coastal locations, powder-coated aluminium performs well but may require periodic inspection for any surface wear over time.
Can I dim this light or adjust the colour temperature?
+
No — this fitting is not dimmable and the colour temperature is fixed at 3000K warm white. If you need adjustable brightness or CCT control, you would need a different product.
Browse our outdoor lights collection or read our outdoor lighting guide. Free delivery on orders over €50. 30-day returns with free returns included.
