Industrial Triple Pendant Light — 6 Rotatable Ring Shades, Metal, E27, W120cm
Free delivery over €50 · 30-day returns guarantee with free returns
An industrial pendant with three double-ring metal bases, each holding two rotatable Ø26cm ring shades. Six E27 sockets, 40W total, height adjustable to 140cm. Shades can be directed individually. Bulbs not included.
Technical Specifications
| Light source | E27 — bulbs not included (6 sockets) |
| Max wattage | 40W total across all 6 sockets |
| IP rating | IP20 — indoor use only |
| Material & finish | Metal frame, metal ring shades |
| Shade diameter | Ø26cm per shade — rotatable |
| Total width | 120cm |
| Height (adjustable) | Up to 140cm — adjusted at installation |
| Shade orientation | Rotatable — each shade can be directed individually |
| Switch | No switch — wall switch required |
| Connection | Hardwired — electrician required |
| Dimmable | Depends on bulb — use dimmable E27 bulbs with a compatible dimmer switch |
Triple Pendant — Rotatable Rings, Six Sockets, Directional Industrial Light
The key feature of this pendant is the rotatable ring shades — each of the six Ø26cm rings can be directed individually, which gives you control over where the light falls rather than accepting a fixed downward output. This makes the fitting more versatile than a standard multi-arm pendant: you can direct all six rings downward for maximum table illumination, angle some outward for ambient fill, or create an asymmetric arrangement that suits the room. The three double-ring bases are arranged along the 120cm frame, each holding two rings — the structure is architectural and graphic, with the ring form reading as a deliberate design choice rather than a conventional shade. At 40W total across six E27 sockets, each socket is limited to approximately 6.5W — use small globe filament LED E27 bulbs at 2700K. The open ring form means the bulb is fully visible, so a filament bulb with a visible element enhances the industrial aesthetic significantly. Height is adjusted at installation up to 140cm maximum drop.
At 120cm wide, this fitting suits dining tables of 120–180cm and works well in open-plan spaces where the graphic ring structure can be appreciated from multiple angles. It is a hardwired fitting — a qualified electrician is required. Not suitable for bathrooms or outdoor use (IP20). Browse our full pendant lights collection or read our kitchen island lighting guide for placement advice.
Common Questions
How do the rotatable ring shades work?
+
Each ring shade rotates on its mount, allowing you to direct the light output in different directions. You can angle all six rings downward for focused table lighting, tilt some outward for ambient fill, or create an asymmetric arrangement. Rotation is manual and can be adjusted after installation without tools.
What bulbs fit within the 40W total limit across 6 sockets?
+
At 40W total across 6 sockets, each socket is limited to approximately 6.5W. Use small globe filament LED E27 bulbs (Ø9.5cm as recommended) at 2700K — a 4–6W LED equivalent is sufficient. The open ring form means the bulb is fully visible, so a filament-style bulb with a visible element is strongly recommended for the best aesthetic.
Is 120cm wide enough for my dining table?
+
120cm suits dining tables of 120–180cm. For a table under 100cm, the fitting will overhang the edges. For a table over 180cm, the ends will be less well lit — the rotatable shades can be angled outward to extend coverage slightly. In an open-plan space, the graphic ring structure reads well from a distance.
Does this require an electrician to install?
+
Yes — this is a hardwired fitting. A qualified electrician must connect it to the ceiling circuit. There is no plug-in option. Height is set at installation up to a maximum of 140cm drop.
Can this pendant be used in a low-ceiling room?
+
The minimum drop is determined by the fitting height itself — the height can be reduced at installation to suit lower ceilings. For a dining table, aim for 70–80cm clearance between the bottom of the fitting and the table surface. Calculate from the table up rather than from the ceiling down: if your ceiling is 240cm and your table is 75cm high, you need the fitting bottom at 145–155cm from the floor, leaving 85–95cm of ceiling clearance for the suspension.
Browse our pendant lights collection or read our kitchen island lighting guide. Free delivery on orders over €50. 30-day returns.
