Galvanised Steel Chandelier — Cylindrical Wire Cages, Black & White Frame, 3×E27, 90cm
Industrial ceiling chandelier in galvanised iron with 3 cylindrical wire cage shades, black metal frame with white interior, 3×E27 sockets (25W max each, 240V), 90cm span and adjustable drop height. Bulbs not included. Hardwired ceiling fixture.
Technical specifications
| Light source | 3× E27 — 25W max per socket, bulbs not included |
| Voltage | 240V |
| IP rating | IP20 — indoor dry use only |
| Material & finish | Galvanised iron frame, black exterior / white interior, cylindrical wire cage shades |
| Dimensions | 90cm (L) × 12cm (W) × 120cm (H max) |
| Height | Adjustable |
| Dimmable | Depends on bulb and dimmer used |
| Connection | Hardwired — professional installation recommended |
Galvanised Steel Chandelier — Wire Cage Diffusion, Industrial-Scandi, Dining & Living Room
This is a hardwired ceiling fixture — a qualified electrician is required for installation. The three cylindrical wire cage shades are the defining feature: the open mesh structure lets light pass through in all directions while casting subtle shadow patterns on surrounding surfaces — the effect is more diffuse and atmospheric than a solid shade. The white interior of the frame reflects light downward efficiently, compensating for the relatively low wattage limit (25W per socket). For best results, use filament LED bulbs (E27, 4–6W, 2700K) — the visible filament glows through the cage for a warm, industrial character; opaque bulbs will work but lose the visual effect. The galvanised finish is durable but may show minor surface variation — this is inherent to the galvanisation process and not a defect. No built-in dimmer; dimmability depends on bulb and wall circuit. Rated IP20: dry indoor rooms only, not suitable for bathrooms or outdoor use. Browse our full chandeliers collection for more options.
At 90cm wide, this chandelier suits rectangular dining tables up to ~160cm or kitchen islands of similar length — position it so the fixture is 20–30cm narrower than the table on each side. Set the drop so the bottom of the cages sits 70–80cm above the table surface. The black-and-white frame with galvanised cages works well in industrial, Scandi, and contemporary loft interiors; it pairs naturally with raw concrete, exposed brick, or light oak furniture. For a layered scheme, combine with wall lights in a matching black metal finish. For broader inspiration, read our guide on chandeliers in Ireland 2026.
Common questions
Do I need an electrician to install this chandelier?
+
Yes. This is a hardwired ceiling fixture and must be installed by a qualified electrician. It connects directly to your ceiling wiring — it is not a plug-in lamp.
Does the wire cage let a lot of light through?
+
Yes — the open mesh structure diffuses light in all directions, creating a warm, atmospheric glow with subtle shadow patterns. The white interior of the frame reflects light downward. For maximum effect, use a visible-filament LED bulb (E27, 2700K).
Which bulbs are recommended?
+
Filament LED bulbs (E27, 4–6W, 2700K) are ideal — the visible filament glows through the cage for a warm industrial effect. Maximum wattage is 25W per socket. Avoid opaque or globe bulbs as they hide the cage detail, and avoid cool-white bulbs (above 4000K).
Is this chandelier dimmable?
+
There is no built-in dimmer. To dim the light, you need dimmable E27 bulbs and a dimmer wall switch — confirm compatibility with your electrician during installation.
What size dining table does this chandelier suit?
+
The 90cm span suits rectangular tables up to approximately 160cm long. As a general rule, the chandelier should be 20–30cm narrower than the table on each side. Set the drop so the bottom of the cages sits 70–80cm above the table surface.
Browse our chandeliers collection or read our guide on chandeliers in Ireland 2026. Free delivery on orders over €50 — free returns within 30 days.
