Flip LED Table Lamp Gravity Sensor — Rechargeable USB, 3 Brightness Levels, White or Grey
Cordless rechargeable LED table lamp with gravity sensor control — tilt the lamp to cycle through 3 brightness levels. 2000mAh lithium-ion battery, USB-A charging, 5V / 0–5W. Available in White or Grey. Integrated LED — no bulb to buy.
Technical specifications
| Light source | Integrated LED — fixed, non-replaceable |
| Power | 5V / 0–5W — rechargeable via USB-A |
| Battery | Lithium-ion 2000mAh — USB-A cable included |
| IP rating | Indoor dry areas only |
| Material | ABS & polycarbonate (PC) |
| Control | Gravity sensor — tilt to cycle 3 brightness levels |
| Connection | Cordless — no mains wiring required |
Flip Table Lamp — Gravity sensor, cordless, 3 brightness levels
The defining feature of the Flip is its gravity sensor — tilting the lamp body cycles through three brightness levels without any buttons or touch surfaces. This makes it particularly useful at the bedside where you want to adjust light without fumbling in the dark. The three levels cover low (night orientation), medium (ambient), and high (reading). The lamp is fully cordless: it charges via the included USB-A cable and runs on a 2000mAh lithium-ion battery. Autonomy varies by brightness level — at low brightness you can expect several hours; at full brightness, less. The LED is integrated and non-replaceable. The ABS and polycarbonate body is lightweight and durable. White and Grey are both neutral finishes that suit most interiors — White is cleaner and more minimal; Grey is slightly warmer and less stark. There is no IP rating, so this lamp is for dry indoor use only — not suitable for bathrooms or outdoor areas.
The Flip works best as a bedside lamp, a reading light on a desk, or a portable accent lamp that you move between rooms. Its cordless design means you can place it anywhere without worrying about cable management. It is a compact decorative lamp rather than a primary room light — at 0–5W, it is not designed to illuminate a full room. For more rechargeable and LED lighting options, browse our table lamps collection or read our table lamp buying guide.
Common questions
How does the gravity sensor work?
+
The lamp detects its own tilt angle using an internal gravity sensor. Tilting the lamp body cycles through three brightness levels — low, medium, and high. There are no buttons or touch surfaces. Simply tip the lamp to change the brightness, and it holds the selected level when returned to upright.
How long does the battery last on a full charge?
+
Battery life depends on brightness level. At low brightness, you can expect several hours of use. At full brightness (5W), the battery drains faster. The 2000mAh lithium-ion battery charges via the included USB-A cable — a standard USB charger or power bank can be used.
Is this bright enough for reading?
+
At its highest brightness level (5W), the Flip provides enough light for comfortable reading at close range — for example, on a bedside table. It is not designed to illuminate a full room and works best as a personal reading or accent light rather than a primary room light source.
Can I replace the LED if it stops working?
+
No. The LED is integrated and non-replaceable. Integrated LEDs typically last 25,000–50,000 hours under normal use. If the LED fails, the unit would need to be replaced.
Can I use this lamp outdoors or in a bathroom?
+
No. The Flip has no IP waterproof rating and is designed for dry indoor use only. It is not suitable for bathrooms, kitchens near water, or outdoor areas. Keep it away from moisture at all times.
Browse the full Table Lamps collection or read our table lamp buying guide. Free delivery over €50 — shipping & returns info.
